HOMEMATIC IP HMIP BDT - Dimmer actuator for mark switch

"With the Homematic IP dimming actuator for brand switches, the existing luminaire system can be easily integrated into a Homematic IP Smart Home system. Thanks to its compact design, the dimming actuator fits comfortably in standard flush-mounted sockets. Already existing switches can be replaced with just a few simple steps if, in addition to the phase, a neutral conductor is also available in the flush-mounted box. Since the actuator is a phase section dimmer, it is particularly suitable for classic incandescent lamps, HV halogen lamps, NV halogen lamps with electronic transformer, for dimmable energy saving lamps and dimmable LED lamps. The maximum switching capacity is 80 VA. Immediately after commissioning, the light output can be dimmed comfortably in 0.5% steps via the free Homematic IP app. Of course, the classic operation by wall button is also retained. Due to the numerous adapter plates available, the dimmer actuator can also be used in the most common switch designs of Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi and Kopp. The standby power consumption is low 0.4 W. Via the Homematic IP app, connected luminaires can be dimmed almost continuously in 0.5% steps Low Standby Current Consumption Compact design for installation in standard flush-mounted sockets Integration into existing switch series by using existing frames and rockers Can be integrated with the appropriate adapter in the most common designs of leading switch manufacturers: Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi, Kopp Reliable operation from a minimum load of 3 VA A neutral conductor must be present for installation Can be operated with the Access point in conjunction with the Homematic IP App, the Homematic Control Center CCU2 as well as with many partner solutions, such as ALEXA "