KOLINK KLR1000FG - Kolink Regulator 1000 W

Ready for ATX 3.0 with a 12VHPWR 600W connector: The REGULATOR series uses an LLC + DC/DC single-rail design with full ATX 3.0 and PCIe 5.0 compatibility to power modern graphics cards with up to 600W via the 12VHPWR connector. To eliminate the need for additional adapters, a 12VHPWR 600W cable with AWG16 is included. Switchable semi-passive mode: The REGULATOR series features a dedicated semi-passive mode that you can easily activate using the switch next to the power button. In this mode, the power supply is passively cooled when operating at up to 40% load, ensuring whisper-quiet performance under light or medium loads. At higher loads, the fan starts at a low speed and is then regulated according to the temperature to assist with cooling. To protect against overheating, the fan automatically turns on if the temperature gets too high. When semi-passive mode is disabled, the fan continues to run at a low speed even under light loads. 100% Japanese capacitors: To ensure outstanding performance and reliability, the REGULATOR series uses premium capacitors from Japan. Very quiet FDB fan: The 120-mm fan is equipped with a fluid dynamic bearing (FDB). The fan blades feature an optimized curved design to draw in air more efficiently and quietly. The generous 8-mm gap between the fan grille and the fan blades ensures minimal turbulence and improved airflow performance while reducing noise. Stable voltages with low ripple: The REGULATOR series provides a clean power supply and tight voltage regulation across the entire load range, ensuring high stability. Impressively compact design: Thanks to a carefully designed PCB layout, the housing is only 14 cm deep. As a result, the REGULATOR series fits into a wide variety of systems and allows for quick and easy installation, even when space is limited. Comprehensive protection features: Extensive safety features have been implemented to ensure the safety of the power supply and the connected components. The REGULATOR series off