Nexmosphere NEO540

Power Controller 540NEO is a power management device that measures and controls all the components in a digital signage installation.Power measurementGather highly accurate data on power parameters for each individual output such as Voltage Current Power and Usage. Power controlControl all 4 power outputs individually and create start-up and shut-down sequences.SchedulingCreate and store up to 16 schedules for stand-alone power control applications.MonitoringActively monitor your installation via numerous diagnostic features such as auto-counters and threshold warnings.Standard APIEffortlessly integrate NEO controllers via Nexmosphere’s easy-to-implement serial API with a single USB connection.Sensor interfacingConnect up to 4 Nexmosphere sensors to the NEO controller to create interactive applications or smart power routines.Measure actual power consumption• Measure the real power consumption of your setup instead of relying on the “typical power usage” specification.• Measure the power usage for different device settings (e.g. brightness of display) or different content types.Start-up and shut-down control• Power your setup in the right order.For instance: first the player then the display.System health monitoring• Check if your devices are still operating as expected. Are all displays switched on and not on standby?• Decrease field visits by remote power cycling.Energy and Cost saving• Create automated schedules to power devices on and off in stand-alone setups.• Numerous smart routine possibilities such as switching on displays based on the presence of a person.Easy USB connectionNEO connects to your digital signage player via USB and can be configured for stand-alone usage.Effortlessly integrate NEO controllers with your digital signage player via Nexmosphere’ s easy-to-implement serial API with one single USB connection. Supported by numerous CMS partners.Connect to networkNEO connects to your network