Perle INJ 1000 Gigabit Ethernet. Fast Ethernet 54 V – 27030058

Cat5e 100 m Power over Ethernet (PoE) IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Plastic Grey INJ 1000 DIN Rail PoE InjectorsIEEE 802.3bt/at/af Mid-span Injector up to 60WINJ 1000 PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. Generating up to 60 Watts, the INJ 1000 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE. With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable. Network Ethernet interface type Gigabit Ethernet, Fast Ethernet Power over Ethernet (PoE) Yes Power over Ethernet (PoE) type supported PoE+ Cable types supported Cat5e Networking standards IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Features Product colour Grey Housing material Plastic Maximum operating distance 100 m Power protection features Over current, Reverse polarity Ports & interfaces Ethernet LAN (RJ-45) ports 2 RJ-45 input ports 1 RJ-45 output ports 1 Power Power over Ethernet (PoE) voltage 54 V Output power 30 W Input voltage 18 - 57 V Input current 2.1 A Power consumption (max) 75 W Certificates Compliance certificates CE Certification IP20 Operational conditions Operating temperature (T-T) 0 - 60 °C Operating relative humidity (H-H) 10 - 95% Storage temperature (T-T) -40 - 85 °C Operating altitude 0 - 5000 m Weight & dimensions Width 30.2 mm Depth 120 mm Height 130 mm Weight 396.6 g leaflet manual pdf