Vision CS-1900P car speaker Round 2-way 2 pc(s)

The CS-1900P are based on Vision’s passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.Changing Room Layout?For function centres which have meeting rooms that can be divided into smaller meeting rooms, a relay can switch between “standalone” mode, or “daisy-chain” mode.Rename Bluetooth, Set PinConnect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.Auto-SwitchingChoose to change to the Bluetooth input automatically when a device is paired, or manually switch.Remote ControlAn included IR remote control gives the user full control, including bass and treble adjustment.IR Front and RearSwitch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.Master/SlaveThe amplifier is housed in the “master” loudspeaker which has the connection panel, and a speaker output connects to the included passive “slave” loudspeaker.Daisy-ChainIf you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.RS-232For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision’s Techconnect Control can be used to control them.Memory2-Way with Kevlar DriverTwo-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.Auto-StandbyIf the amplifier senses no input for ten minutes it will automatically go into standby mode.- Bluetooth device NOT PAIRED when it goes into standby: they will wake