Elta SANO IPIV WALL H Wall Mounted Positive Input Ventilation Unit with Heater

The Elta SANO IPIV WALL H is a wall mounted positive input ventilation unit for homes without a usable loft, such as flats and bungalows with room-in-roof. It supplies filtered fresh air to a central point, usually the hallway, to cure condensation and mould, with an integral heater that tempers incoming air. Wall mounted PIV for flats and homes without loft access Integral multicore heater, supply temperature selectable 10°C to 20°C ECO-LoFlo control adjusts airflow to incoming air temperature and moisture 6 installer settings from 11 to 29 l/s Very large G2 filter for low maintenance Configurable spigot or grille outlet, left or right handed Suitable for Condensation and mould control in flats and apartments Homes without a loft for a loft mounted PIV Radon reduction in some properties Installation Mount on an external wall with a supply duct to a central ceiling point, or use the end panel grille outlet. Choose the unit setting to suit the size and layout of the home. Optional PIV B and PIV B+H switches add boost and heater control. Wiring by a qualified electrician. Specifications Brand Elta Model SANO IPIV WALL H Type Wall mounted positive input ventilation with heater Airflow settings 11, 15, 18 (default), 22, 26, 29 l/s Power (fan only) 3.6 to 15.6 W (higher with heater on) Heater Integral multicore, supply air 10°C to 20°C Filter G2 Spigots 2 x 97 mm Modes Normal, ECO-LoFlo, Comfort Control, Override Boost Matching accessories Optional PIV B (boost) and PIV B+H (boost and heater) user switches. Manuals & GuidesElta SANO IPIV Wall H Datasheet